Milano 9.5kw Electric Shower
The Milano electric shower features:
- Unique swivel elbow pipe connection, allowing plumbing to enter shower from left or right hand side. This makes them ideal for retrofit installations, as often no extra plumbing is required.
- Indicator lights to show low incoming water pressure and when the selected temperature is too high to allow sufficient water flow through the heating elements
- Phased shut-down safety feature - the shower will continue to run on for a few seconds after being switched off. This flushes out excess hot water from the shower and reduces limescale build-up inside the unit.
- Separate temperature control to ensure that your next visit to the shower needs no further adjustment.
- Temperature stabilisation to minimise temperature fluctuation when other taps are opened.
- Luxury three spray handset with Rub-clean feature.
- New-style riser rail that fits flush to wall, with integrated hose retainer and soap tray.
The Milano Electric showers are ideal for a second bathroom and for homes that do not have a stored hot water supply.
Electric showers must be installed to a mains cold water supply with a minimum running pressure of 1.0 bar.
A separate and permanently connected cable must be taken from the consumer unit directly to the shower via a double pole isolating switch. The installation must comply with the latest IEE wiring regulations.
If you are in any doubt please contact a qualified plumber and/or electrician.
| Price | £165.00 |
|---|
